About Us (Hindi New)
   Noida Export Processing Zone                Becomes               Noida Special Economic Zone

                                                                                                                          

Form - F

CONSOLIDATED APPLICATION FORM for – 
(See rule 17)

            1. Setting up of units in Special Economic Zone;

            2. Annual permission for sub-contracting;

            3. Allotment of Importer Exporter Code Number;

            4. Allotment of land/industrial sheds in the Special Economic Zone;

            5. Water Connection;

            6. Registration-cum-Membership Certificate;

            7. Small Scale Industries Registration;

            8. Registration with Central Pollution Control Board;

            9. Power connection;

            10. Building approval plan;

            11. Sales Tax registration;

            12. Approval from Inspectorate of factories;

            13. Pollution control clearance, wherever required;

            14. Any other approval as may be required from the State Government.

 -----------------------------------------------------------------------

1. The application should be submitted to the Development Commissioner of the concerned Special Economic Zone in 5 copies alongwith a crossed Demand Draft of rupees five thousand drawn in favour of The Pay & Accounts Officer of the concerned Special Economic Zone together with a project report giving details of activities proposed.

-----------------------------------------------------------------------

For Official Use only

Application No.         ______________________________

Date:                   ______________________________

Details of Bank Draft

Amount Rs.             ___________________

Draft No.               ___________________

Draft date             ___________________

Drawn on                ___________________

(Name of the Bank)

Payable at             ____________________

 

PART - I

I. Name and full address of applicant firm/       _______________________

company (in block letters)

Registered Office in case of limited           _______________________

company & Head Office for                     _______________________

others)                                         _______________________

Pin Code                                        _______________________

Tel. No.                                        _______________________

Fax No.                                         _______________________

Permanent E-Mail Address                         _______________________

Web-Site, if any                                 _______________________

Passport No., if any                               _______________________

Name of Bank with Address & Account No.         _______________________

Digital Signature                           _______________________

Income Tax PAN                                 _______________________

(attach copy)

II.       Constitution of the applicant firm:       Public Limited Company

Tick (√ ) the                            Private Limited Company

appropriate entry]                         Partnership

Proprietor ship

Others (please specify)

 

(Attach copy of Certificate of Incorporation alongwith Articles of Association and Memorandum of Association in case of companies and partnership deed in case of partnership firms.)

 

III. Nature of the industrial undertaking

 

i.    Large scale

ii.   Medium scale

iii. Small scale

 

IV.   Name and complete address of each       ____________________________

Of the Directors/Partners/Proprietor,

as the case may be with

Telephone numbers

 

V. ITEM (S) OF MANUFACTURE/SERVICE ACTIVITY:

(Including By-product/Co-products)

(If necessary, additional sheets may be attached)

Item(s) Description Capacity(Unit = )

(Not required for service unit)

________________              ________________

________________              ________________

________________              ________________

 

VI. INVESTMENT:                                           (RS. IN LAKHS)

 

(a)   Plant and Machinery

________________________

 

(i)       Indigenous              ________________________

(ii) Import CIF value         ________________________

(iii) Total (i) + ii)         ________________________

(b)       Details of source(s) of finance

VII. Import and indigenous requirement of materials and other inputs:

(Value in Rupees)

Import Indigenous

a) Capital Goods

b) Raw material, components, consumables, packing material, fuel etc. for 5 years

(Give details in project report, namely list of Capital Goods, description

of raw materials, and other inputs, etc).

TOTAL:                                          -----------------------

-----------------------

VIII. INFRASTRUCTURE REQUIREMENTS

1. Requirement of land: - (Area in sq. mtrs.)

                        i. factory & offices

                        ii. Warehousing/storage

                        iii. Others, specify

2. Requirement of built-up area

3. Requirement of Water (in Kilo Litres)

                        i. For industrial (process) purposes

                        ii. For drinking purposes

                        iii. Others, specify

                        iv. Total requirement

4. Effluent Treatment

                        i. Quantum and nature of effluents and mode of disposal

                        ii. Specify whether own Effluent Treatment Plant will be created

5. Requirement of Power

   (in KVA)

IX. EMPLOYMENT                   Men         Women

X. WHETHER FOREIGN TECHNOLOGY AGREEMENT IS ENVISAGED

(Tick ( \/ ) the appropriate entry)

Yes ____________ No_____________

(i) Name and Full Address of foreign collaborator

(ii) Nature of Collaboration

1. Equity Participation including Foreign Investment

(i)               ($ in thousand) (Rs. in lakhs)

(a) Authorized ________________ ________________

(b) Subscribed ________________ ________________

(c) Paid up Capital ________________ ________________

Note: If it is an existing company, give the break up of existing and proposed capital structure

(ii) Pattern of share holding in the paid-up capital (Amount in Rupees)

(Rs. in lakhs) (US $ Thousand)

(a) Foreign holding       _____________           ___________________

(b) Non Resident Indian company / Individual holding

(i) Repatriable             _____________           ___________________

(ii) Non-repatriable       _____________           ___________________

(c) Resident holding       _____________           ___________________

(d) Total Equity            _____________           ___________________

(e) External commer-       ______________          ___________________

cial Borrowing

(give details)

2. Technical collaboration

(furnish details in project report)

(Gross of Taxes)

(a) Lumpsum payment                 _____________________

(b) Design & Drawing fee             _____________________

(c) Payment to foreign technician       _____________________

(d) Royalty (on exports)             ____________________%

(e) Royalty                         ____________________

(on domestic tariff area sales if envisaged)

(f) Duration of agreement ______(Number of years)

3. Marketing collaboration

(furnish details in project report)

XI. Foreign Exchange Balance sheet

Total Total

      1st  2nd  3rd  4th  5th (5 yrs)

       Rs. In lakhs

/$ in thousand

1.

FOB value of

exports in first

five years

2.

* Foreign Exchange

outgo on for the first

five years

3.

Net Foreign

Exchange earnings

For the first five years

1) – (2)

* Foreign exchange outgo shall include the CIF value of import of machinery, raw material, components, consumables, spares, packing materials and amount of repatriation of dividends and profits, royalty, lumpsum knowhow fee, design and drawing fee, payment of foreign technicians, payment on training of Indian technicians abroad, commission on export, interest on external commercial borrowings, interest on deferred payment credit and any other payments.

 

XII. OTHER INFORMATION

 

i) Whether the applicant has been issued any       _______________

Industrial license or LOI/LOA under EOU/SEZ/      _______________

STP/EHTP scheme. If so,                     _______________      give full particulars, namely reference number,

date of issue, items of manufacture and

progress of implementation of each project.

ii) Whether the applicant or any of the       _________________

partner/Director who are also partners          _________________

/Directors of another company or firms its

associate concerns are being proceeded

against or have been debarred from

getting any License/Letter of Intent/

Letter of Permission under Foreign Trade

(Development and Regulation) Act, 1992 or

Foreign Exchange Management Act, 1999 or

Customs Act, 1962 or Central Excise Act,1944.

 

 

Place :_________             Signature of the Applicant ______________

Date :________               Name in Block Letters __________________

Designation ___________________

Official Seal/Stamp __________Tel. No. ___________________

e-mail ___________________

Web-Site, if any ___________________

Full Residential Address_________________

 

UNDERTAKING

I/We hereby declare that the above statements are true and correct to the best of my/our knowledge and belief. I/We shall abide by any other condition, which may be stipulated by the Development Commissioner. I/We fully understand that any Permission Letter/Approval granted to me/us on the basis of the statement furnished is liable to cancellation or any other action that may be taken having regard to the circumstances of the case if it is found that any of the statements or facts therein furnished are incorrect or false.

 

An affidavit duly sworn in support of the above information is enclosed.

 

 

Place:__________              Signature of the Applicant ______________

Date:___________ Name in Block Letters ________________

Designation _________________

Official                      Full Official address _________________

Seal/Stamp __________________      Tel. No. _________________

e-mail Address _________________

Web-Site _________________

Full Residential address ________________

_________________

Tel. No __________________

 

Note: Formats of application not given herein may be obtained from the Development Commissioner. 

PART- II

If sub-contracting is envisaged in the

manufacturing operations, furnish

following details:

 

i.    Sub-contracting permission is required for -

(a) part of the production process (quantify)

(b) any particular production process (give details)

 

ii.   Name and address and other particulars

of sub-contractor and whether the sub-

contractor is

 

(a)   Domestic Tariff Area unit/Central Excise

Registered or otherwise

 

(b)   Other Special Economic Zone unit

(c)   Export Oriented unit or Electronic Hardware

Technology Park unit or Software Technology Park unit.